News:

Attention: For security reasons,please choose a user name *different* from your login name.
Also make sure to choose a secure password and change it regularly.

Main Menu

Recent posts

#21
Trenz Electronic FPGA Modules / TE 0725 series and transceiver...
Last post by martinius - October 15, 2026, 02:34:49 AM
Do the TE 0725 series modules offer inputs (or outputs) for the transceiver?  As far as i understood the cicruit they are not available, right?

What is the connection of the LWL-jack?  Is it normal IO possibly using SERDES?

Was it theoratically possible to somehow modify the board on ourselves to get transceivers running?
#22
Trenz Electronic FPGA Modules / Re: Boot image compatibility b...
Last post by blee - October 14, 2026, 03:05:59 AM
Hi.
Thank you for the prompt guidance.
I have configured the TEB0955 base board for SD boot mode as you instructed:
S3.1: ON
S3.2: OFF
S3.3: ON
S3.4: OFF
And I am using a 12V power supply also as recommended.
thanks
#23
Trenz Electronic FPGA Modules / Re: Boot image compatibility b...
Last post by MA - October 13, 2026, 01:00:25 PM
Hi,

which configuration did you use?

For SD boot mode, please configure the TEB0955 as follows:

  • S3.1:ON
  • S3.2:OFF
  • S3.3:ON
  • S3.4:OFF

Then please try again.

Regarding the power supply, please use a 12 V / 2 A power supply if possible.

br

#24
Trenz Electronic FPGA Modules / Re: Boot image compatibility b...
Last post by blee - October 13, 2026, 09:45:21 AM
Hi,
Thank you for your previous response confirming that the boot image built for the AMB0010 base board should work on the TEB0955-02 base board with the TE0955-01 SOM.

However, I am still facing a boot failure when using the exact same image on the TEB0955-02 setup.

To provide more details on the boot issue with the TEB0955-02 base board, I have tested different module combinations and found the following results:

AMB0010-01 Base Board: Both TE0955-01 and TE0955-02 SOMs boot up successfully with the image.
TEB0955-02 Base Board: Neither TE0955-01 nor TE0955-02 SOM boots up using the exact same image and setup.

Could you please provide further guidance or troubleshooting steps for this? Specifically, are there any differences in the hardware configuration (such as boot mode switch settings, or clock configurations) between the AMB0010 and TEB0955-02 that I might need to adjust for the TEB0955-02 board?

Thanks a lot
#25
Trenz Electronic FPGA Modules / Re: AXE5000 + CR00300 MIPI?
Last post by d.signer - October 09, 2026, 05:53:01 PM
Thanks Antti!
#26
Trenz Electronic FPGA Modules / Re: AXE5000 + CR00300 MIPI?
Last post by Antti Lukats - October 09, 2026, 10:16:33 AM
It seems the ref design is only available for AXC3000 but it is mostly compatible to AXE500.

https://github.com/ArrowElectronics/refdes-agilex3/tree/main/axc3000
#27
Trenz Electronic FPGA Modules / Re: Boot image compatibility b...
Last post by Antti Lukats - October 09, 2026, 10:14:10 AM
Quote from: blee on September 30, 2026, 02:44:09 AMCan I use that image file for TEB0955-02 Base with TE0955-01 SOM directly ?

should work, yes.
#28
Trenz Electronic FPGA Modules / Re: AXE5000 + CR00300 MIPI?
Last post by Antti Lukats - October 09, 2026, 10:13:08 AM
There is reference design from Arrow that uses MIPI and HyperRAM on AXE5000.
But I can not find the GitHub link anymore :(
And it use MIRA220 camera, not rpi camera
#29
Trenz Electronic FPGA Modules / AXE5000 + CR00300 MIPI?
Last post by d.signer - October 08, 2026, 11:33:55 AM

Did anybody get the combination of AXE5000 + CR0300 + some MIPI camera (e.g. like any of the Raspberry Pi camera modules) working?

Or is there a reference design available somehwere? Presumably some simple RAW image capture using the MIPI PHY/CSI-RX only and not including all the qsys stuff for Altera VPP.
#30
Trenz Electronic FPGA Modules / Re: Problem with TEM0007 DDR s...
Last post by RC - September 30, 2026, 01:35:45 PM
Hello,

Please contact our support team support@trenz-electronic.de and provide the serial number and the article number of your TEM0007 module.

Best regards,
Ruoshui Chen