Author Topic: PL pin for Camera Link interface  (Read 1521 times)

_dave

  • Active Member
  • *
  • Posts: 6
PL pin for Camera Link interface
« on: July 23, 2018, 04:07:11 PM »
I managed to run the hello world example [1] on my board. Now I want to attach the camera via the camera link interface. The idea is to proceed in an analog fashion as in the example, that is getting the camera link pins, routing them to the System Controller and then to the PS for the interface with the host machine to first display the camera image. While looking for the corresponding pins for the interface, I couldn't find any description.

First of all, is this the proper way to connect the camera to the board and route the image data? The idea is later to do image processing on the FPGA as well.

Secondly, if yes, how do I figure out, which pins I have to write in the system controller constraint file to read out the camera link input?

I use a TE0720 with a TE0701 carrier board.

[1]: https://wiki.trenz-electronic.de/display/PD/TE0720+Test+Board