Upgrade TE0803-01-03-1EA-S Starter Kit to TE0808-04-09-1EE-S Starter Kit

[jlamp]

Hi,

I bought a TE0803-01-03-1EA-S  time ago and now due to resource problems in the fpga I would like to upgrade it.

I have seen that the TE0808-04-09-1EE-S Starter Kit and TE0803-01-03-1EA-S share the same Carrier board so changing the incoming TE0803-01-03EG-1EA module with the TE0808-04-09EG-1EE:  https://shop.trenz-electronic.de/en/TE0808-04-09EG-1EE-UltraSOM-MPSoC-Modul-with-Zynq-UltraScale-XCZU9EG-1FFVC900E-4-GB-DDR4 would be enough right? Or I need the one with 2.5mm Samtec connector?

About the MBH31001-15W/2.6 heatsink, can I ask one module with this included?

Thanks,

Jorge

[JH]

Hi,

I have seen that the TE0808-04-09-1EE-S Starter Kit and TE0803-01-03-1EA-S share the same Carrier board so changing the incoming TE0803-01-03EG-1EA module with the TE0808-04-09EG-1EE:  https://shop.trenz-electronic.de/en/TE0808-04-09EG-1EE-UltraSOM-MPSoC-Modul-with-Zynq-UltraScale-XCZU9EG-1FFVC900E-4-GB-DDR4 would be enough right?

What do you mean with would be enough?  This depends on your design. 09EG has more PL sources, than 03EG:

• https://www.xilinx.com/products/silicon-devices/soc/zynq-ultrascale-mpsoc.html#productTable

Basics are compatible between TE0808 and TE0803, so you can change module. But you must reconfigure PS with our settings --> GTP CLK REF are different for example. And you must change loc constrains of PL IOs. Design is the same, see reference Designs:

• https://wiki.trenz-electronic.de/display/PD/TE0803+StarterKit
• https://wiki.trenz-electronic.de/display/PD/TE0808+StarterKit

Or I need the one with 2.5mm Samtec connector?

Stacking high is not so important (only for connector specification):

• https://wiki.trenz-electronic.de/pages/viewpage.action?pageId=36245987

But you must  take use correct space holder.

About the MBH31001-15W/2.6 heatsink, can I ask one module with this included?

MBH31001-15W/2.6 heatsink is standard BGA heatsink, i'm not sure if we sell them separately or connected on module only.  You can write to our sales support: sales@trenz-electronic.de
br
John