ArduZynq TE0723-03M PL Clock

[z1990]

Hallo all,
I wanted to ask about the 12 MHz MEMS Oscillator on this board, to which pin is it connected? and can I read it directly from PL side ?
what is the recommended way to achieve 250 MHz clocking freqency in the PL side ?? from PS or so?

Thanks in advance

[JH]

Hi,
12MHz(U7) is for FTDI, see:

• https://www.trenz-electronic.de/fileadmin/docs/Trenz_Electronic/TE0723/REV03/Documents/SCH-TE0723-03M.PDF

You can use PS CLKs.  Use PS PLLs or PL MMCMs to generate 250Hz.
We provide reference designs with board parts for correct PS-IP initialization. PS is not initialized, if you configure SoC with bitfile only, you must generate FSBL to get PS CLKs.

• https://shop.trenz-electronic.de/en/Download/?path=Trenz_Electronic/TE0723/Reference_Design

br
John

[z1990]

Thank you very much for your response ! it was really helpfull ...