Author Topic: RTCM with Gmm-u1 / Gms-d1 / Gms-u1LP evaluation kit  (Read 7794 times)

Horsa

  • Moderator
  • Full Member
  • *****
  • Posts: 145
  • Trenz Electronic GmbH
    • Trenz Electronic GmbH
RTCM with Gmm-u1 / Gms-d1 / Gms-u1LP evaluation kit
« on: September 08, 2010, 05:57:57 PM »
Q: May I test RTCM on Gmm-u1 evaluation kit or Gms-d1 evaluation kit or Gms-u1LP evaluation kit?

RTCM is not available on the following standard evaluation-kits:
  • GlobalTop Gmm-u1 evaluation kit (standard)
  • GlobalTop Gms-d1 evaluation kit (standard)
  • GlobalTop Gms-u1LP evaluation kit (standard)
as the RTCM pin is not connected.

GlobalTop though provides an RTCM capable version of the same evaluation-kits:
  • GlobalTop Gmm-u1 evaluation kit (RTCM)
  • GlobalTop Gms-d1 evaluation kit (RTCM)
  • GlobalTop Gms-u1LP evaluation kit (RTCM)
The port functions of the RTCM version of the corresponding evaluation kits are listed hereunder:
  • USB port: power supply + GlobalTop GPS module UART port over MediaTek virtual COM port driver
  • RS-232 port: RTCM data transfer to the GlobalTop GPS module

Please contact us for further information.
« Last Edit: March 16, 2011, 09:23:47 AM by Horsa »