Jupyter Demo for ZyncBerry

[oe8bck]

Hi,

I recently got a ZyncBerry RE0726-04 and wanted to install this demonstration system:
https://www.trenz-electronic.de/Downloads/?path=Trenz_Electronic/Modules_and_Module_Carriers/special/TE0726/Reference_Design/2019.2/zynqberrydemo4

I did not find the correct part number in design_basic_settings.cmd, so I set PARTNUMBER=4. The integration succeeded and then I tried to upload the configuration. But this fails with the message given
ERROR: [Labtools 27-3303] Incorrect bitstream assigned to device. Bitfile is incompatible for this device.

Any ideas how to fix this? (I am using Vivado 2019.2)

KR,
Christof

[oe8bck]

Sorry, typo. Part is TE0726-04

[Antti Lukats]

Sorry, typo. Part is TE0726-04

TE0726-04 is too short for the product code, it only includes the main product code and PCB revision but no infos about assembly option.

So most likely you did choose wrong product code, the most likely right choice is 3 not 4, 4 is for the Z007 version that has different PL size and incompatible bitfiles

[oe8bck]

Thanks for the quick answer!

Vendor Part Number is TE0726-04-41C98-A (mit Zync 7010-1C)

Obviously the bitfiles are incompatible. I used Vivado 2019.2, the build process up to the integration worked, but bitfile generation failed.

KR, Christof

[Antti Lukats]

Thanks for the quick answer!

Vendor Part Number is TE0726-04-41C98-A (mit Zync 7010-1C)

Obviously the bitfiles are incompatible. I used Vivado 2019.2, the build process up to the integration worked, but bitfile generation failed.

KR, Christof

yes you generated bit file for 007 but you have 010 part, hence the error when booting/configuring