Author Topic: Quad SPI core in XPS 13.2  (Read 4060 times)

GuinnessTrinker

  • Active Member
  • *
  • Posts: 32
Quad SPI core in XPS 13.2
« on: June 21, 2012, 12:51:28 PM »
When adding a Quad SPI device for the Winbond flash to the "Recommended starting point for EDK-based designs" at
http://www.trenz-electronic.de/download/d0/Trenz_Electronic/d1/TE0600-GigaBee_series/d2/TE0600/d3/reference_designs.html

I get this error:

ERROR:Xst:2647 - Failed to run core generator for <axi_quad_spi_0_wrapper_dist_mem_gen_v6_2> macro.
ERROR:EDK - xst: unknown error occurred.
ERROR:EDK:546 - Aborting XST flow execution!


According to
http://forums.xilinx.com/t5/EDK-and-Platform-Studio/SPI-core-that-supports-Winbond-QUAD/td-p/107787/page/2

I am not the only one.
Does anyone solved this problem?

Antti Lukats

  • Hero Member
  • *****
  • Posts: 515
    • Trioflex
Re: Quad SPI core in XPS 13.2
« Reply #1 on: July 12, 2012, 05:33:01 PM »
This Xilinx tool/IP issue, so need

1) hope that is fixed in new releases some day
2) webcase, etc.. etc headagainsthewall, and again...

antti

GuinnessTrinker

  • Active Member
  • *
  • Posts: 32
Re: Quad SPI core in XPS 13.2
« Reply #2 on: July 13, 2012, 08:11:18 AM »
I do use "normal" spi now.