Author Topic: Monitoring EASY (Embedded Assist System) orbit prediction data  (Read 11355 times)


  • Moderator
  • Full Member
  • *****
  • Posts: 145
  • Trenz Electronic GmbH
    • Trenz Electronic GmbH
Q: Is there a way or command to monitor / read / write the orbit prediction data of the EASY (Embedded Assist System) function?

No, unlike the AGPS" / "EPO in Flash" data, there is not any user command available to monitor the EASY self-generated orbit prediction data.
With Packet Type:869 PMTK_CMD_EASY_ENABLE
Code: [Select]
you can just set or get whether the EASY function is enabled or disabled.
« Last Edit: March 23, 2012, 03:58:41 PM by Horsa »