TE0726 -ZynqBerry Power Pins

[zaknahhas]

Hallo all,
in the Wiki and the Manual of the TE0726. it is mentioned that the board could be powered from the J5 with 5v, which I am doing since years.
Is there negative side to power the board from PINS 2 and 4 on the J8 or there is some reason for not doing that ? Electrically they are connected together, but only J5 is mentioned in the provided info.

Thanks in advance

[Waldi3141]

Hello,

power can also be supplied through PIN 2 and 4 of the J8 Header. Electrically the same.

best regards

waldi