Author Topic: test camera using TE0726-03M  (Read 100 times)


  • Active Member
  • *
  • Posts: 18
test camera using TE0726-03M
« on: April 06, 2021, 01:38:20 PM »
Hi, I want to initialize the imx219 using the sensor_config.h and rpicam.c in demo1. I replace the iic_write/read_reg with the function of xillinx. However, the project does not work. I want to know that what the IIC address of the camera? The TE0726.PDF  notes that the board use a IIC MUX and the address of the MUX is 0x70,how should I get the address of the IIC of csi?

Oleksandr Kiyenko

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 404
Re: test camera using TE0726-03M
« Reply #1 on: April 07, 2021, 09:12:41 AM »
Hi Gloria,

please not create several topics with the same questions.
I answer this question at,

Best regards
Oleksandr Kiyenko