Author Topic: Remote debug with Eddy-CPU  (Read 9687 times)


  • Active Member
  • *
  • Posts: 6
Remote debug with Eddy-CPU
« on: June 29, 2011, 05:32:34 PM »
I'm trying to use remote debug under linux(ubuntu 10.04), but without success.
I following LemonIDE user guide (5.4.4) with running tae in telnet session.
The program is successful uploaded to Eddy-CPU, LemonIDE switch to Debug perspective, but following error is shown in Debug view, debugger thread:
symbol is not available 0x00000000

I tried also with gdb (esto) server again under linux, but the error is the same.
There is not problem to execute (run) remotely the program and I got trace from telnet session running tae.
Also when I tried to run /opt/lemonix/bin/arm-linux-lemonidegdb I got:
Bus error

Somebody to have the same problem before?
« Last Edit: June 29, 2011, 06:00:27 PM by krasimir.k »

Thorsten Trenz

  • Administrator
  • Full Member
  • *****
  • Posts: 155
    • Trenz Electronic GmbH
Re: Remote debug with Eddy-CPU
« Reply #1 on: June 30, 2011, 10:22:31 AM »
we did not experience this problem under Windows. We will try to get more information, and come back to you.

best regards
Thorsten Trenz