Boot at power up

[mt-user-2019]

Hello,

Is there a way to boot at powerup with ultrascale product such as :

TEB0911 UltraRack+ MPSoC Board with Xilinx Zynq UltraScale

and

UltraITX+ Baseboard for Trenz Electronic TE080X UltraSOM+

Thank you in advance
BR
MT

[JH]

Hello,
TEB0911 will boot on power up, if correct boot image is available -->primary  SD or QSPI boot, depending on DIP.

TEBF0808 with TE080x modules can also boot direct on power up, but in this case you must reconfigure CPLD of the TEBF0808, default version is like PC, you must press power button to start boot process.
See: https://wiki.trenz-electronic.de/display/PD/TEBF0808+CPLD+Firmware#TEBF0808CPLDFirmware-AvailableCPLDFirmware
--> Power Down Disabled (SCM_07B_powerdown_disabled.jed/SCS_07B_powerdown_disabled.jed) -can be used to power on with main power supply, if Jumper is add to J10-6 and J10-8 instead of Enclosure Button

br
John

[mt-user-2019]

Hello JH,

Thank you for your fast reply as usual.

I will try that.

BR
MT

[mt-user-2019]

Hello,

It worked very well
thx

BR
MT

[JH]

Hi,

It worked very well

Nice to hear that it works for you.
Thanks for your feedback.

br
John