Author Topic: Switching between "One Sentence (1-sentence)" and NMEA  (Read 7798 times)

Horsa

  • Moderator
  • Full Member
  • *****
  • Posts: 145
  • Trenz Electronic GmbH
    • Trenz Electronic GmbH
Switching between "One Sentence (1-sentence)" and NMEA
« on: May 25, 2011, 12:30:29 PM »
Q: How can I switch between One Sentence (1-sentence) and NMEA sentence output formats?

Provided that your firmware supports both One Sentence (1-sentence) and NMEA sentence output formats, yuo can send the following commands:
  • $PGCMD,21,1*6F<CR><LF>
    for Binary sentence mode
  • $PGCMD,21,2*6C<CR><LF>
    for One sentence mode
  • $PGCMD,21,3*6D<CR><LF>
    for Standard NMEA sentence mode