Print Page - Carrier for TE0710 that supports both ethernets..

Title: Carrier for TE0710 that supports both ethernets..
Post by: donpost on November 28, 2018, 08:15:16 PM

Hi,

I was wondering if you have a carrier for the TE0710 that breaks out both Fast Ethernet ports?

Thanks!

Title: Re: Carrier for TE0710 that supports both ethernets..
Post by: Oleksandr Kiyenko on November 29, 2018, 05:41:26 PM

Hi,

please check https://wiki.trenz-electronic.de/display/PD/4+x+5+SoM+Carriers

BR
Oleksandr

Title: Re: Carrier for TE0710 that supports both ethernets..
Post by: JH on November 30, 2018, 01:40:03 PM

Hi,
on our current 4x5 carrier 4 lanes for Gbit ETH are connected to on ETH connector.
So with TE0710 and the both Fast Ethernet (one lane for every phy), they will be connected to the same ETH connector.
So with default ETH cable only ETH0 should works.

What you can do: Connect a modified ETH cable, where you split the two 100MBit lane to separate lanes.
We have no example online at the moment, but I think this can work.

So maybe you can try out this with TE0703 carrier. Schematics:

https://shop.trenz-electronic.de/de/Download/?path=Trenz_Electronic/Modules_and_Module_Carriers/4x5/TE0710/REV02/Documents
https://shop.trenz-electronic.de/de/Download/?path=Trenz_Electronic/Modules_and_Module_Carriers/4x5/4x5_Carriers/TE0703/REV05/Documents

br
John

Title: Re: Carrier for TE0710 that supports both ethernets..
Post by: donpost on December 02, 2018, 07:03:48 PM

Thanks for the replies!! I'll look into the solutions suggested..

-Don

Trenz Electronic GmbH Support Forum

Trenz Electronic Products => Trenz Electronic FPGA Modules => Topic started by: donpost on November 28, 2018, 08:15:16 PM