I need to reduce output slew rate from 2 to 0 on the MAX1000 board. At 3.3V LVCMOS and 3.3 LVTTL I/O standard it is impossible. It is possible at 3.0 V I/O standard. The MAX1000 has 3.3V power. How to set a slew rate to 0?
Thank you
Hi,
- https://www.altera.com/en_US/pdfs/literature/hb/max-10/ug_m10_gpio.pdf (https://www.altera.com/en_US/pdfs/literature/hb/max-10/ug_m10_gpio.pdf)
page 17 table 6.
It's not possible, as you already found out.
br
John