Hello,
In order to design our custom carrier board for the TE0720 we are following the reference design of TE0706 and we bought the XMOD FTDI JTAG adapter compatible with xilinx tools to be used with our board.
We're interested to setup the boot mode always from the flash memory and have the option to connect the JTAG tool always its needed and program the TE0702, would the next settings be the correct ones for it? or am I missing something else?:
MODE --> GND
PROGMODE --> 3.3v
EN1 --> GND
Thanks in advance.
Hi,
- https://wiki.trenz-electronic.de/display/PD/TE0706+TRM#TE0706TRM-4-bitDIP-switch (https://wiki.trenz-electronic.de/display/PD/TE0706+TRM#TE0706TRM-4-bitDIP-switch)
- https://wiki.trenz-electronic.de/display/PD/TE0720+TRM#TE0720TRM-BootProcess
- https://wiki.trenz-electronic.de/display/PD/TE0720+TRM#TE0720TRM-SystemControllerCPLDI/OPins
S1-2 to ON (set PROGMODE to GND) -> FPGA in JTAG Chain
S1-3 to OFF (set MODE to VDD) --> QSPI Boot mode
S1-4 to OFF (set EN1 to VDD) --> Enable Module
BR
John