Print Page - TE0741 programming with xc3sprog

Title: TE0741 programming with xc3sprog
Post by: Rtg on July 11, 2017, 08:03:44 AM

I am trying to program TE0741 and the flash with xc3sprog. But it shows the error that 'XC7K160T' can't be programmed (snip attached). But I saw that Kintex 7 was in the list of supported hardware of xc3sprog. Also, what are the constraints to be used for the flash programming?

Title: Re: TE0741 programming with xc3sprog
Post by: Rtg on July 11, 2017, 08:10:08 AM

Link to the bscan file: https://github.com/matrix-io/xc3sprog/blob/master/bscan_spi/bscan_xc7_spi.vhd
Link to supported hardware list: http://xc3sprog.sourceforge.net/hardware.php
Link to the constraints file from resource: https://www.trenz-electronic.de/fileadmin/docs/Trenz_Electronic/TE0741/Reference_Design/14.7/TE0741-02.ucf

Title: Re: TE0741 programming with xc3sprog
Post by: Rtg on July 11, 2017, 09:25:04 AM

Hi. xc3sprog still gives the same error. But I was able to find the top file and constraints file. https://shop.trenz-electronic.de/en/Download/?path=Trenz_Electronic/TE0741/Reference_Design/14.7/XS3SPROG

I am not sure why they would be there if the board was not meant to be programmed using xc3sprog. Any suggestions anybody?

Title: Re: TE0741 programming with xc3sprog
Post by: JH on July 12, 2017, 12:46:13 PM

Hi,
why do you need xc3sprog?

You can use Xilinx tools to program Flash or FPGA device. Use SDK or Vivado HW-Manager: https://wiki.trenz-electronic.de/pages/viewpage.action?pageId=14746264#Vivado/SDK/SDSoC-XilinxSoftwareProgrammingandDebugging

br
John

Trenz Electronic GmbH Support Forum

Trenz Electronic Products => Trenz Electronic FPGA Modules => Topic started by: Rtg on July 11, 2017, 08:03:44 AM