Print Page - Proper Mounting to a 4x5 carrier

Title: Proper Mounting to a 4x5 carrier
Post by: ckalaigian on January 24, 2017, 03:22:16 PM

I have a TE0711 module and wish to mount onto a TE0706 carrier. Is the preferred mounting method to KEEP the standoffs ON the TE0711 or should they be removed ?

Title: Re: Proper Mounting to a 4x5 carrier
Post by: JH on January 25, 2017, 12:05:21 PM

Keep the standoffs on the module. So it's easier to dismount the module from the carrier, if needed.

br
John

Trenz Electronic GmbH Support Forum

Trenz Electronic Products => Trenz Electronic FPGA Modules => Topic started by: ckalaigian on January 24, 2017, 03:22:16 PM