Print Page - TE0723-02M Schematics

Title: TE0723-02M Schematics
Post by: dvorakvik on May 15, 2016, 03:08:57 PM

Please, can you publish the updated PCB schematics for the TE0723-02M version. If not now, please at least the new connectors J2, J6 and J11 pins names.

Best regards

Viktor

Title: Re: TE0723-02M Schematics
Post by: JH on May 17, 2016, 10:37:31 AM

Hi,

you can use the schematics from TE0723-02 version. It's the same schematic, the -02m has only more memory.

br
John

Title: Re: TE0723-02M Schematics
Post by: dvorakvik on May 17, 2016, 11:47:59 AM

Hi,

many thanks for your reply. But what significance has the RED CROSS above mentioned connectors in the schematics.

Best regards,

Viktor

Title: Re: TE0723-02M Schematics
Post by: JH on May 17, 2016, 12:00:32 PM

Hi,

that's only soldering option from Altium Designer. So the PCB is delivered without 2.54mm Header connectors, but the pads are connected.

br
John

Title: Re: TE0723-02M Schematics
Post by: dvorakvik on May 17, 2016, 01:32:13 PM

Hi,

many thanks for the clear answer. I do not use Altium Designer ......

Best regards,

Viktor

Trenz Electronic GmbH Support Forum

Trenz Electronic Products => Trenz Electronic FPGA Modules => Topic started by: dvorakvik on May 15, 2016, 03:08:57 PM