Print Page - Interfacing of camera through USB (module

Title: Interfacing of camera through USB (module - TE320 Series)
Post by: indirapriya on January 05, 2016, 07:35:23 AM

Hi all,
I need to interfacing camera through USB in VHDL and my question is that
(I) what am I do in first?
(II)what procedure to follow?
Slave FIFO interface or virtual com port program in vhdl provided by the trenz
(III) and also camera frequency and USB frequency is different. what am i do?
and should i follow asynchronous slave FIFO interface?

thanks in advance

Title: Re: Interfacing of camera through USB (module - TE320 Series)
Post by: Antti Lukats on January 05, 2016, 09:40:24 AM

This is not trivial task, special code is needed in VHDL and software wise also.

Trenz Electronic GmbH Support Forum

Trenz Electronic Products => Trenz Electronic FPGA Modules => Topic started by: indirapriya on January 05, 2016, 07:35:23 AM