Text only | Text with Images

Trenz Electronic GmbH Support Forum

Trenz Electronic Products => Trenz Electronic FPGA Modules => Topic started by: os on December 03, 2015, 12:51:06 PM

Title: Why JM1 connector signal pin 84 tied to ground on TE0715-03-30 FPGA board?
Post by: os on December 03, 2015, 12:51:06 PM
Hello.
We are using the TE0715-03-30 FPGA board on the TE0701 carrier to access an FMC card (FMCOMMS3).
Could you explain why signal pin 84 on the TE0701-05 board`s connector JB1 connected to a GND on the TE0715-03-30 FPGA board side connector (JM1)?
Thanks.
Title: Re: Why JM1 connector signal pin 84 tied to ground on TE0715-03-30 FPGA board?
Post by: Antti Lukats on December 03, 2015, 01:49:58 PM
can you explain what you mean?

as the connectors are unisex the odd-even numbers swap module <> baseboard.

I can not see any problems related to pin 84
Title: Re: Why JM1 connector signal pin 84 tied to ground on TE0715-03-30 FPGA board?
Post by: os on December 03, 2015, 02:15:33 PM

Thanks for the explanation!
Text only | Text with Images