Text only | Text with Images

Trenz Electronic GmbH Support Forum

Trenz Electronic Products => Trenz Electronic FPGA Modules => Topic started by: lcn on September 07, 2015, 05:02:58 PM

Title: TE0715-03-30-1I3 (Low Profile) Carrier Board compatibility
Post by: lcn on September 07, 2015, 05:02:58 PM
Is TE0715-03-30-1I3 (Low Profile) module compatible with the TE0701 Carrier Board?

Thanks in advance
Title: Re: TE0715-03-30-1I3 (Low Profile) Carrier Board compatibility
Post by: Antti Lukats on September 08, 2015, 09:54:36 AM
it is as compatible as the "standard" not low profile module, there are restrictions on the IO voltages because of the HP banks on the B2B for TE0715 with 7030 chip.
Title: Re: TE0715-03-30-1I3 (Low Profile) Carrier Board compatibility
Post by: lcn on September 08, 2015, 10:34:42 AM
Thanks for your quick response and thanks again for warn me about HP banks IO voltage compatibility...that's a good point!
Title: Re: TE0715-03-30-1I3 (Low Profile) Carrier Board compatibility
Post by: rouben_s on January 22, 2016, 03:06:41 AM
So just to be clear the TE0715 (low profile) module is fully compatible with the TE0701 carrier card?
Title: Re: TE0715-03-30-1I3 (Low Profile) Carrier Board compatibility
Post by: Antti Lukats on January 22, 2016, 08:51:32 AM
there is no difference for our carried board if the module is standard or low height.
Text only | Text with Images