Text only | Text with Images

Trenz Electronic GmbH Support Forum

Trenz Electronic Products => Trenz Electronic FPGA Modules => Topic started by: pmsoftware on November 13, 2014, 11:48:04 AM

Title: TE0720-02-1CR linux 3.12 reboot
Post by: pmsoftware on November 13, 2014, 11:48:04 AM
Hi,
migrating from TE0720-01-1CR to TE0720-02-1CR seems that the linux command "reboot" does not work anymore and the OS stops before rebooting.
Do you have any advice or issue?

Actually we are using a 3.12 linux kernel sourced from github.com/Xilinx/linux-xlnx.git

Thanks
Paolo
Title: Re: TE0720-02-1CR linux 3.12 reboot
Post by: Oleksandr Kiyenko on November 24, 2014, 12:45:21 PM
Hello,

I just test "reboot" command on test system with 3.12 kernel on TE0720-02 and it works as it should. Think that this command behaviour is not depand on board, but only on system configuration.

Best regards
Oleksandr Kiyenko
Title: Re: TE0720-02-1CR linux 3.12 reboot
Post by: pmsoftware on November 24, 2014, 01:00:53 PM
Hi,
thank you always for support. I will check again and I will try to discover which module is in hanging state.
Best Regards
Paolo
Text only | Text with Images