Print Page - TE0728 IO_4 & IO

Title: TE0728 IO_4 & IO_5
Post by: remy on May 11, 2026, 01:17:15 PM

Hi,

What are the IO_4 and IO_5 pins on the TEB0728 carrier board connected/routed to on the TE0728 module?
It's pin J1.8 & J1.10 on the B2B connectors.

Thanks,
Reidar

Title: Re: TE0728 IO_4 & IO_5
Post by: mch on May 18, 2026, 06:03:22 PM

Hi,

The pins are connected to pins J1-8 and J1-10 of the B2B connector on the TE0728 module. However, these signals are unused on the module and are not connected to any pin or component.

Best regards,
Mohsen Chamanbaz

Trenz Electronic GmbH Support Forum

Trenz Electronic Products => Trenz Electronic FPGA Modules => Topic started by: remy on May 11, 2026, 01:17:15 PM