Hi :)
1/ I recently bought a MKR2UNO to use with my MAX1000
the mkr2uno has 2 pins named TX/RX are they connected to the usb port in any way
2/ any example somewhere showing how to use ADC with the MAX10000 ?
3/ I saw links to the schematics but they are all dead
if there a link working somewhere
[I would like to build a base board for the MAX 1000]
4/ if I don't want to use the ADC on MAX1000 is it possible to use these pins
as standard I/O
5/ I saw some questions about sdram controller, I wrote a replica1 / apple 1 in vhdl
it contains my SDRAM controller as well as a sram to sdram bridge
usefull top connect al old 6502/6800/6809 core and probably a z80
1/ USB has no pins named RX/TX, those are referring on mkr2uno that those pins are default UART pins. For MAX1000 they are just regular FPGA IO pins, use anyway you want, not limited to UART
2/ sorry no. Arduino MKR has AIN pins so we connected them to MAX10 ADC capable pins but never used as ADC
3/ I just now checked from our online shop all schematic links work, just download the schematic there
4/ YES, they are regular IO
5/ We are using some open-source SDRAM controller in our test designs, it works well