I recently got a CR00240-02 which has both a HDMI and MIPI connector and is titled "CRUVI-HS HDMI and 15-pin CSI-2 Camera Adapter":
https://www.trenz-electronic.de/en/CRUVI-HS-HDMI-and-15-pin-CSI-2-Camera-Adapter/CR00240-02-A?path=Trenz_Electronic/CRUVI/CR00240/REV01/Pictures
But the schematics:
https://www.trenz-electronic.de/trenzdownloads/Trenz_Electronic/CRUVI/CR00240/REV01/Documents/SCH-CR00240-01-A.PDF
has no sign of a MIPI connector. Is this an old out of date schematics? If yes, where can I find the current schematics?
BTW the 2. link above to the schematics was obtained from the 1. link above in the Download section, however this is not for the CR00240-02-A. Where can I find the "02" version schematics?
The modifications are mentioned in the PCN in the Download section:
https://www.trenz-electronic.de/trenzdownloads/Trenz_Electronic/CRUVI/CR00240/PCN/PCN-20251204%20CR00240-01%20to%20CR00240-02%20Hardware%20Revision%20Change.pdf
But there is no information on how the MIPI signals are connected to the CRUVI connector.
I sent schematic to your email address. The web download for REV 02 comes also soon.