Print Page - How to setup CAN interface on TE0818

Title: How to setup CAN interface on TE0818
Post by: Bugtech on January 16, 2025, 04:38:25 PM

I am working on TE0818 board. I want to use CAN interface to send and receive data, Is there any guide or tutorial to setup this connection?

Are there any drivers needed to be installed separately? (CAN4Linux or SocketCAN)

I have petalinux 2022.2 in my board.

Title: Re: How to setup CAN interface on TE0818
Post by: Antti Lukats on April 24, 2025, 03:52:53 PM

Quote from: Bugtech on January 16, 2025, 04:38:25 PMI am working on TE0818 board. I want to use CAN interface to send and receive data, Is there any guide or tutorial to setup this connection?

Are there any drivers needed to be installed separately? (CAN4Linux or SocketCAN)

I have petalinux 2022.2 in my board.

This is better answered on AMD forums, we have the hardware capability on the baseboard but no demo design for it.

Title: Re: How to setup CAN interface on TE0818
Post by: JH on May 06, 2025, 09:55:46 AM

Hi,
CAN interface in PS is enabled on TE0818 reference design together with TEBF0818 (https://wiki.trenz-electronic.de/display/PD/TE0818+StarterKit), but we didn't enabled additional drivers.
For addition changes check: https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/18842496/Linux+CAN+driver

br
John

Trenz Electronic GmbH Support Forum

Trenz Electronic Products => Trenz Electronic FPGA Modules => Topic started by: Bugtech on January 16, 2025, 04:38:25 PM