Hello,
I have recently purchased a TE0950-03 board but I am unable to boot it with the provided prebuilt files.
I am using the files from your web area at test_board/prebuilt/os/petalinux/8GB/
I have copied the files in that area to the SD card and after connecting power I do not seem to see any UART led activity. The serial connection to PUTTY does not show any messages either. I have verified the serial connection with other boards. The mode is set as in the picture that I understand is SD card boot mode.
Basically, I can see the LED DONE going on immediately and then after a few minutes where nothing seems to happen, I can see the LED ERROR on.
Do you have any advise or alternative reference design that I could use to test the board, please?
Thanks for your help,
Hi,
did you also put the Boot.bin file on the SD card?
https://wiki.trenz-electronic.de/display/PD/TE0950+Test+Board#TE0950TestBoard-SD-Bootmode
it's \prebuilt\boot_images\23_1lse_8gb\u-boot\Boot.bin for the most assembly variants
br
John