Trenz Electronic Products => Trenz Electronic FPGA Modules => Topic started by: carefullythe on July 09, 2024, 06:39:30 AM
Title: TE0720 issue
Post by: carefullythe on July 09, 2024, 06:39:30 AM
Hello,
At some point I must have programmed the QSPI with U-Boot. Now every time I try to run a test app from Vitis I see U-Boot start. Sometimes my test app will run after it but usually it does not.
Title: Re: TE0720 issue
Post by: MA on July 09, 2024, 12:16:14 PM