In the Wiki page there is a typo:
https://wiki.trenz-electronic.de/pages/viewpage.action?pageId=94489182
Kernel generation
This guide leads through the kernel generation task.
Create a new folder in a known existing folder via mkdir software
Change into the new folder via cd software
Clone the git repository via git clone https://github.com/altera-opensource/linux-sodfpga.gitIt should refer to ...socfpga... and not ...sodfpga...
Correct Github repository:
https://github.com/altera-opensource/linux-socfpga.git
Then also under Kernel generation:
Quote
Select one of the tags and check it out via git checkout rel_socfpga-<selection>
The wiki page is not very helpful here and outdated. I first chose a new version and it was too new. Then I guessed an older version and maybe it was too old. What version was used when the WIKI page was written?
Hi,
thank you for the hint, i have corrected the mistake.
Quote from: fweinrebe on October 11, 2021, 05:50:31 PM
The wiki page is not very helpful here and outdated. I first chose a new version and it was too new. Then I guessed an older version and maybe it was too old. What version was used when the WIKI page was written?
The version "rel_socfpga-4.14.126-ltsi-rt_19.12.01_pr" should work.
We currently work on an update where we use yocto project. In the meantime i would recommend to using the manual from Arrow Electronics for the TEI0022 board:
Main page: https://github.com/ArrowElectronics/data-storm-daq/wiki (https://github.com/ArrowElectronics/data-storm-daq/wiki)
Starting point for Golden System Reference Design: https://github.com/ArrowElectronics/data-storm-daq/wiki/Golden-System-Reference-Design-(GSRD) (https://github.com/ArrowElectronics/data-storm-daq/wiki/Golden-System-Reference-Design-(GSRD))
I think with this guide you will have more success at the moment.
br
Thomas
Hi Thomas,
thank you for the reply as well as your email.
Thanks for the rectification and confirmation of the socfpga file.
Glad to hear you are transitioning to Yocto.
Kind Regards
Fritz