Print Page - TE0722 pin positions

Title: TE0722 pin positions
Post by: henk on March 07, 2020, 12:42:30 PM

Considering to use TE0722 module in a new project I was looking for the right pin positions in a 40pins footprint (P1+P2).
Looking to the top picture "TE0722-02I top.jpg" I assume that pin1 is close to the silkscreen text "J3". Correct??

Thanks

Title: Re: TE0722 pin positions
Post by: JH on March 09, 2020, 07:36:16 AM

Hi,
yes the square ones are pin 1, see also:
https://wiki.trenz-electronic.de/display/PD/TE0722+TRM#TE0722TRM-MainComponents
--> connector location
https://wiki.trenz-electronic.de/display/PD/TE0722+Getting+Started
--> Getting started use the same names like on the schematics:
https://shop.trenz-electronic.de/de/Download/?path=Trenz_Electronic/Modules_and_Module_Carriers/special/TE0722/REV02/Documents

br
John

Title: Re: TE0722 pin positions
Post by: henk on March 11, 2020, 01:50:34 PM

Thanks John,
I just overlooked the "getting started" page. Clear for designing the new board for the TE0722. The attached figure copied from that page is very informative.

Best regards,
Henk

Trenz Electronic GmbH Support Forum

Trenz Electronic Products => Trenz Electronic FPGA Modules => Topic started by: henk on March 07, 2020, 12:42:30 PM