/include/ "system-conf.dtsi"
/ {
  chosen {
    xlnx,eeprom = &eeprom;
  };

reserved-memory {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;
		rproc_0_dma: rproc@46d00000 {
			no-map;
			compatible = "shared-dma-pool";
			reg = <0x0 0x46d00000 0x0 0x100000>;
		};
		rproc_0_reserved: rproc@3ed00000 {
			no-map;
			reg = <0x0 0x3ed00000 0x0 0x8000000>;
		};
	};
	   
	zynqmp-rpu {
		compatible = "xlnx,zynqmp-r5-remoteproc-1.0";
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;
		core_conf = "split";
		r5_0: r5@0 {
			#address-cells = <2>;
			#size-cells = <2>;
			ranges;
			memory-region = <&rproc_0_reserved>, <&rproc_0_dma>;
			pnode-id = <0x7>;
			mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>;
			mbox-names = "tx", "rx";
			tcm_0_a: tcm_0@0 {
				reg = <0x0 0xFFE00000 0x0 0x10000>;
				pnode-id = <0xf>;
			};
			tcm_0_b: tcm_0@1 {
				reg = <0x0 0xFFE20000 0x0 0x10000>;
				pnode-id = <0x10>;
			};
		};
	};

	zynqmp_ipi1 {
		compatible = "xlnx,zynqmp-ipi-mailbox";
		interrupt-parent = <&gic>;
		interrupts = <0 29 4>;
		xlnx,ipi-id = <7>;
		#address-cells = <1>;
		#size-cells = <1>;
		ranges;
		   
		/* APU<->RPU0 IPI mailbox controller */
		ipi_mailbox_rpu0: mailbox@ff90000 {
			reg = <0xff990600 0x20>,
			<0xff990620 0x20>,
			<0xff9900c0 0x20>,
			<0xff9900e0 0x20>;
			reg-names = "local_request_region",
			"local_response_region",
			"remote_request_region",
			"remote_response_region";
			#mbox-cells = <1>;
			xlnx,ipi-id = <1>;
		};
	};
};



/* SDIO */

&sdhci1 {
   disable-wp;
   no-1-8-v;
};

/* ETH PHY */
&gem3 {

	status = "okay";
  ethernet_phy0: ethernet-phy@0 {
		compatible = "marvell,88e1510";
		device_type = "ethernet-phy";
    		reg = <1>;
	};
};
/* USB 2.0 */
 
/* USB  */
&dwc3_0 {
    status = "okay";
    dr_mode = "host";
    maximum-speed = "high-speed";
    /delete-property/phy-names;
    /delete-property/phys;
    /delete-property/snps,usb3_lpm_capable;
 	 snps,dis_u2_susphy_quirk;
  	snps,dis_u3_susphy_quirk;
};
   
&usb0 {
    status = "okay";
    /delete-property/ clocks;
    /delete-property/ clock-names;
    clocks = <0x3 0x20>;
    clock-names = "bus_clk";
};




/* QSPI PHY */
&qspi {
    #address-cells = <1>;
    #size-cells = <0>;
    status = "okay";
    flash0: flash@0 {
        compatible = "jedec,spi-nor";
        reg = <0x0>;
        #address-cells = <1>;
        #size-cells = <1>;
    };
};

&i2c0 {
  eeprom: eeprom@50 { 
     compatible = "atmel,24c08";
     reg = <0x50>;
  };
};