Hello Trenz buddies
I have a TEF1001 board and have attached a daughter board on FMC. I need to turn the FMC fan on. I would appreciate it if you provide a quick guide on this.
Regards
Meysam
Hi,
https://wiki.trenz-electronic.de/display/PD/TEF1001+CPLD#TEF1001CPLD-FANFMC
this should be enabled when you connect FMC card which use FMC preset signal .
--> I assume you you has PCB Rev02 and bough it after 2019 or newer?
br
John