Recent posts

#1

Trenz Electronic FPGA Modules / Re: Si5338 TE0713

Last post by JH - April 17, 2024, 08:56:13 AM

Hi,
sorry for TE0713 we have only older ClockBuilder Desktop project, which is not longer avaliable from Skyworks.
Start with TE0712 project and configure reconfigure outputs to:

/Internal feedback enabled
//Output Clock 0
// Output is off
//Output Clock 1
// Output is off
//Output Clock 2
// Output Frequency (MHz) = 125.000000000
// Mux Selection = IDn
// MultiSynth = 20  (20.0000)
// R = 1
//Output Clock 3
// Output Frequency (MHz) = 200.000000000
// Mux Selection = IDn
// MultiSynth = 12  1/2  (12.5000)
// R = 1
//Driver 0
// Disabled
// Powered off
// Output voltage = 3.30
// Output type = 3.3V LVDS
// Output state when disabled = StopLow
//Driver 1
// Disabled
// Powered off
// Output voltage = 3.30
// Output type = 3.3V LVDS
// Output state when disabled = StopLow
//Driver 2
// Enabled
// Powered on
// Output voltage = 1.80
// Output type = 1.8V LVDS
// Output state when disabled = StopLow
//Driver 3
// Enabled
// Powered on
// Output voltage = 1.80
// Output type = 1.8V LVDS
// Output state when disabled = StopLow

I can send you also this older project file, when you write to support@trenz-electronic.de, in case you still need these files. Rework with newer Tool chain is still on our TODO List, but I can't  tell you any timeline at the moment.
br
John

#2

Trenz Electronic FPGA Modules / Re: share a vitis project with...

Last post by JH - April 17, 2024, 08:45:20 AM

Hi,
I think this can be helpfull for you
https://support.xilinx.com/s/question/0D52E00006hpKoNSAU/how-to-port-a-vitissdk-project-to-another-pc?language=en_US

You can also export workspace and import on other PC.

We use lokal repository and include them into our reference design, so you can use them like AMD-Xilinx example. But there is less documentation from ADM available how you create such a template. We mostly copy some example from the vitis installation and change it like we need. But I think for you is export workspace or maybe GIT solution from the AMD forum link more suitable

br
John

#3

Trenz Electronic FPGA Modules / Re: simulation in gowin fpga d...

Last post by JH - April 17, 2024, 08:40:27 AM

Hi,
I think Govin EDA hasn't simulator intergraded.
https://www.gowinsemi.com/en/support/home/

So you must use Third Party simulator like matlab or so.

br
John

#4

Trenz Electronic FPGA Modules / share a vitis project with 2 P...

Last post by beautycornbread - April 17, 2024, 03:48:21 AM

Hello,

I have used the share function for version control which was fine.
Now a college has to work with me on the same project but the platform and appl. system project uses (local) absolute paths (e.g. path to sysroot).

Could anybody plaese give me a hint for a good practise or a tutorial to share vitis projects between 2 colleges or PCs?

#5

Trenz Electronic FPGA Modules / Re: imx219 on TE0726

Last post by MA - April 16, 2024, 07:16:15 AM

Hi,
without knowing the schematic of your imx219, I assume that the LED is connected to pin 12 of the connector. This is connected to a GPIO on the TE0726, which is not used but is pulled up by default. This means that the LED lights up as soon as the FPGA is supplied with power.
Best regards,
Manuela

#6

Trenz Electronic FPGA Modules / simulation in gowin fpga desig...

Last post by fatherlyhurt - April 15, 2024, 10:37:20 AM

hello
I want to simulation with gowin fpga designer and write test bench, but There is no simulation option in the tools menu.
How can I simulate with gowin fpga designer?

#7

Trenz Electronic FPGA Modules / imx219 on TE0726

Last post by ramiroflores - April 12, 2024, 11:41:48 AM

When i test the imx219 on TE0726, I found that there is a led on imx219 and the led is on. I wonder know that is that once the led is on when camera is connected or when the camera is working. If the led is not on, is it indicates that the camera is not worked?

#8

Trenz Electronic FPGA Modules / Re: TE0720 + TE0703 Gadget Ser...

Last post by Swiss222 - April 08, 2024, 02:03:50 PM

Hi,
Having the same issue with petalinux 2022 and TE0715 (so zynq 7000). I lost so much time before trying out
"compatible = "usb-nop-xceiv";

I am implementing USB RNDIS and I'm now facing new problems, but I can't be certain they aren't related to this compatibility issue with ulpi-phy . I couldn't find any other mention of this except in this thread, really wish this was documented somewhere.

#9

Arrow USB Programmer2 / Re: Linux, Quartus Programmer ...

Last post by JH - April 05, 2024, 07:44:02 AM

Hi,
unfortunately I can say only the same like on your email request.

This is a know issue which seems to happens with Agilex FPGA together with Arrow programmer an Linux only. Unfortunately Arrow didn't have a solution until now.
PS: I've add a note to our Documentations: https://wiki.trenz-electronic.de/display/PD/Arrow+USB+Programmer#ArrowUSBProgrammer-Knownissues.1

br
John

#10

CYC1000 community projects / Re: I present a comunity of IN...

Last post by Subcritical - April 03, 2024, 07:05:53 PM

Various implementations of Spectrums an Pentagons maybe Tsconf:

https://en.wikipedia.org/wiki/List_of_ZX_Spectrum_clones
All of those computers that still are increasing today, belongs to you, Sir Clive!


I'm goin to work,in the future hopping that in the future the CYC1000 & MAX1000, appears in that list.