- Welcome to Trenz Electronic GmbH Support Forum.
Recent posts
#11
MAX1000 community projects / Re: Playing ZX Spectrum in HDM...
Last post by Subcritical - June 23, 2025, 10:59:38 AMI have trimmed the implementation of Next186 so that it can be a description of 8Kles; it still doesn't boot from SD, but over time it will. I am sharing the sources.
Next186_SoC-max1000.zip
#12
Arrow USB Programmer2 / Re: Step-by-step videos solvin...
Last post by Subcritical - June 23, 2025, 10:39:43 AMIf you install QUARTUS II Lite, don't move to other drawer because the jtag server fails to initialize, it search the path in the place you install qu
artus.
#13
UltraScale / Re: TE0808 starter kit selecti...
Last post by MA - June 16, 2025, 10:47:13 AMHi,
I apologise, but unfortunately a mistake has crept in and the board files are not up to date, as with the StarterKit design. However, you can use variant 91 (TE0808-05-9GI21-E) without any problems.
If you want to have the current board files, please download the StarterKit design and copy the complete folder "board_files" into your design. This is probably the easiest way.
br Manuela
I apologise, but unfortunately a mistake has crept in and the board files are not up to date, as with the StarterKit design. However, you can use variant 91 (TE0808-05-9GI21-E) without any problems.
If you want to have the current board files, please download the StarterKit design and copy the complete folder "board_files" into your design. This is probably the easiest way.
br Manuela
#14
UltraScale / TE0808 starter kit selection
Last post by sr_lm - June 12, 2025, 03:59:59 PMI have purchased this module: AMD-Zynq-Ultrascale-ZU9EG-2I-4-GByte-DDR4 TE0808-05-9GI81-E
When I downloaded the FPGA Reference Design and ran the _create_setup_linux.sh, it's missing the TE0808-05-9GI81-E as a module selection options (see attached screenshot). Is there an alternative that I could use from that list? Or is there a newer version of the reference design which includes this module?
When I downloaded the FPGA Reference Design and ran the _create_setup_linux.sh, it's missing the TE0808-05-9GI81-E as a module selection options (see attached screenshot). Is there an alternative that I could use from that list? Or is there a newer version of the reference design which includes this module?
#15
Trenz Electronic FPGA Modules / Re: TE0701 / TE0711 UART Pins
Last post by haraldmz - June 10, 2025, 08:45:54 AMQuote from: Antti Lukats on June 05, 2025, 10:16:45 AMHi,
all you need is to read the TE0701 TRM, it is all explained there:
https://wiki.trenz-electronic.de/display/PD/TE0701+TRM
There is a diagram that shows that the CPLD is "forwarding" the UART pins, and a bit later is defined to WHAT pins the forwarding is done. So all the information you need is there.
Ah, I missed the table further down. Thanks for the clarification.
#16
UltraScale / Re: TE0865-02+TEBT0865+KK0865
Last post by mer - June 05, 2025, 05:47:47 PMOk, thanks for the reply. Let me ask this then, do you have a schematic/documentation for the little JTAG/UART board that is plugged into JB1 on the carrier? There are a couple switches on there that I'm not sure what they do. Thanks.
#17
UltraScale / Re: TE0865-02+TEBT0865+KK0865
Last post by Antti Lukats - June 05, 2025, 10:24:03 AMTEBT0865 is TEST basis (the second T stands for TEST) to just test TE0865 is alive. It was designed much earlier than KK0865, hence there is no PWM Fan header on this board. The design support for TEBT0865 is currently limited to Schematic that is available from downloads.
#18
Trenz Electronic FPGA Modules / Re: TE0701 / TE0711 UART Pins
Last post by Antti Lukats - June 05, 2025, 10:16:45 AMHi,
all you need is to read the TE0701 TRM, it is all explained there:
https://wiki.trenz-electronic.de/display/PD/TE0701+TRM
There is a diagram that shows that the CPLD is "forwarding" the UART pins, and a bit later is defined to WHAT pins the forwarding is done. So all the information you need is there.
all you need is to read the TE0701 TRM, it is all explained there:
https://wiki.trenz-electronic.de/display/PD/TE0701+TRM
There is a diagram that shows that the CPLD is "forwarding" the UART pins, and a bit later is defined to WHAT pins the forwarding is done. So all the information you need is there.
#19
Trenz Electronic FPGA Modules / TE0701 / TE0711 UART Pins
Last post by haraldmz - June 05, 2025, 09:52:12 AMWhere do I find which pins on JB1 the UART lines are connected to? The TE0701 TRM chap. 5.2 says "UART RX", "UART TX" on JB1, but such pin names do not exist on TE0701 JB1. I tried to get a clue from reading the schematics but the trace ends at CLPD BDBUS0 and 1 (which _may_ be the correct pins but the TRM chap. 6.2 does not state this clearly). But the BDBUS pins aren't available on JB1 anyway.
So what gives?
So what gives?
#20
UltraScale / TE0865-02+TEBT0865+KK0865
Last post by mer - June 04, 2025, 11:42:27 PMHello, beginning to put together as system utilizing TE0865-02+TEBT0865+KK0865. Noticing that the TEBT0865 TRM is empty. Am I looking in the wrong place? https://wiki.trenz-electronic.de/display/PD/TEBT0865
Also, there doesn't seem to be an obvious place to plug in the KK0865 pwm fan. Little help?
Also, there doesn't seem to be an obvious place to plug in the KK0865 pwm fan. Little help?