Trenz Electronic GmbH Support Forum

Trenz Electronic Products => Evaluation Boards => EDDP-EDPS Support => Topic started by: AhmedShaaban on February 28, 2022, 05:25:55 PM

Title: TEB0745 IO/Expander Addresses Issue
Post by: AhmedShaaban on February 28, 2022, 05:25:55 PM
Hello All,

Regarding the IO Expander (U18 - U25) addresses, Kindly update the TEB0745-02 schematic and TRM documents as the addresses stated are not the actual ones.

The docs state that the addresses are :
and that is true for PCF8574DWR. But the placed IO Expander is PCF8574A which addresses are :

Thanks.
Title: Re: TEB0745 IO/Expander Addresses Issue
Post by: JH on March 01, 2022, 07:11:29 AM
Hi,
can you send me the serial number of your TEB0745(please send the number to support@trenz-electronic.de). It's the number on the small sticker with QR code.
br
John
Title: Re: TEB0745 IO/Expander Addresses Issue
Post by: AhmedShaaban on March 01, 2022, 07:46:55 AM
Hi John,

Ok I will send it.

Thanks.
Title: Re: TEB0745 IO/Expander Addresses Issue
Post by: JH on March 01, 2022, 08:10:17 AM
Hi,
I've checked your serial number. This carrier is from 2017. At that time, the other expanders were once equipped by mistake (were incorrectly labelled). At that time we didn't add PCN to our public doc, only the customers were informed (your module went to Digikey), maybe that's why it didn't reach you.  If something like this happens again (which I hope not), then we would also add a PCN or AN to the Public Wiki.
So default PCF8574DWR is assembled on TEB0745

br
John
Title: Re: TEB0745 IO/Expander Addresses Issue
Post by: AhmedShaaban on March 02, 2022, 07:47:05 AM
Hi John,

Thanks for clarification.

BR,
Ahmed.