Author Topic: TE0705-04 USB driver problem  (Read 531 times)

mikedon1

  • Active Member
  • *
  • Posts: 2
TE0705-04 USB driver problem
« on: September 02, 2021, 11:57:22 PM »
I'm using a TE0705-04 board for the first time.  I have a windows 7 machine, Vivado 2017.4, and a TE7012 module.  S3-3 is on the "on" position.  The board is powered.

When I plug into the jtag USB port, I get an intallation error, and it shows up in device manager under "Other devices" as a "Digilent USB device", and Vivado can't find the programmer.

I can program other FPGA boards, such as a cmod A7, from Vivado.

How can I fix this issue?

Thanks, -Mike

JH

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1835
Re: TE0705-04 USB driver problem
« Reply #1 on: September 03, 2021, 06:39:01 AM »
Hi,
What did you see when you try to connect Vivado HW manager? Nothing or only digilent serial number or unkown device or something else?
br
John

mikedon1

  • Active Member
  • *
  • Posts: 2
Re: TE0705-04 USB driver problem
« Reply #2 on: September 03, 2021, 02:32:53 PM »
When I try "open target", and Auto Connect, nothing happens.  It still says "no hardware target is open."  In the device manager, it says that the driver for the device is not installed.  I assume that is the first thing that needs to be fixed.

JH

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1835
Re: TE0705-04 USB driver problem
« Reply #3 on: September 06, 2021, 08:47:05 AM »
Hi,

Quote
In the device manager, it says that the driver for the device is not installed
But when you connect cmod A7, you see a diligent number?
br
John