Text only | Text with Images

Trenz Electronic GmbH Support Forum

Trenz Electronic Products => Trenz Electronic FPGA Modules => Topic started by: selftones on October 09, 2014, 11:58:36 AM

Title: TE0600-01 VCCIO0 2.5V
Post by: selftones on October 09, 2014, 11:58:36 AM
The manual says, one should remove R79 and populate R80 to supply VCCIO0 at 2.5V. While R79 is documented in the assembly sheet (AD-TE0600-01.pdf), I cannot identify R80. Please advice.
Title: Re: TE0600-01 VCCIO0 2.5V
Post by: Thorsten Trenz on October 09, 2014, 12:30:00 PM
Hi,
I added complete assembly diagram, R80 is at the bottom side of the PCB.
http://www.trenz-electronic.de/fileadmin/docs/Trenz_Electronic/TE0600-GigaBee_series/TE0600/documents/archive/AD-TE0600-all-01.PDF

best regards
Thorsten Trenz
Title: Re: TE0600-01 VCCIO0 2.5V
Post by: selftones on October 09, 2014, 12:37:32 PM
Great, thanks.
Text only | Text with Images