Print Page - TE0726 -ZynqBerry Power Pins

Title: TE0726 -ZynqBerry Power Pins
Post by: zaknahhas on September 27, 2023, 10:24:20 AM

Hallo all,
in the Wiki and the Manual of the TE0726. it is mentioned that the board could be powered from the J5 with 5v, which I am doing since years.
Is there negative side to power the board from PINS 2 and 4 on the J8 or there is some reason for not doing that ? Electrically they are connected together, but only J5 is mentioned in the provided info.

Thanks in advance

Title: Re: TE0726 -ZynqBerry Power Pins
Post by: Waldi3141 on September 28, 2023, 10:05:24 AM

Hello,

power can also be supplied through PIN 2 and 4 of the J8 Header. Electrically the same.

best regards

waldi

Trenz Electronic GmbH Support Forum

Trenz Electronic Products => Trenz Electronic FPGA Modules => Topic started by: zaknahhas on September 27, 2023, 10:24:20 AM