-------------------------------------------------------------------------------- Xilinx First Stage Boot Loader (TE modified) Release 2021.2 Apr 22 2024-13:54:45 Device IDCODE: 23727093 Device Name: 7z020 (7) Device Revision: 2 -------------------------------------------------------------------------------- TE0720 TE_FsblHookBeforeHandoff_Custom SoM: TE0720-03-0A14S SC REV:07 MAC: 80 34 28 86 2C 87 -------------------------------------------------------------------------------- U-Boot 2021.01 (Oct 12 2021 - 09:28:42 +0000) CPU: Zynq 7z020 Silicon: v3.1 DRAM: ECC disabled 256 MiB Flash: 0 Bytes NAND: 0 MiB MMC: mmc@e0100000: 0, mmc@e0101000: 1 Loading Environment from FAT... *** Warning - bad CRC, using default environment In: serial@e0000000 Out: serial@e0000000 Err: serial@e0000000 Net: ZYNQ GEM: e000b000, mdio bus e000b000, phyaddr 0, interface rgmii-id eth0: ethernet@e000b000 U-BOOT for petalinux importing env from FSBL shared area at 0xFFFFFC00 Found valid magic ## Info: input data size = 27 = 0x1B Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot.scr 556 bytes read in 26 ms (20.5 KiB/s) ## Executing script at 03000000 ## Loading kernel from FIT Image at 01000000 ... Using 'conf-system-top.dtb' configuration Verifying Hash Integrity ... OK Trying 'kernel-1' kernel subimage Description: Linux kernel Type: Kernel Image Compression: uncompressed Data Start: 0x010000f8 Data Size: 4570160 Bytes = 4.4 MiB Architecture: ARM OS: Linux Load Address: 0x00200000 Entry Point: 0x00200000 Hash algo: sha256 Hash value: ab65cda9b77fc6e0036322c40a844476ef4849c62046c89602dafe69b1c00b7e Verifying Hash Integrity ... sha256+ OK ## Loading ramdisk from FIT Image at 01000000 ... Using 'conf-system-top.dtb' configuration Verifying Hash Integrity ... OK Trying 'ramdisk-1' ramdisk subimage Description: petalinux-image-minimal Type: RAMDisk Image Compression: uncompressed Data Start: 0x014610e0 Data Size: 9809739 Bytes = 9.4 MiB Architecture: ARM OS: Linux Load Address: unavailable Entry Point: unavailable Hash algo: sha256 Hash value: 5340ac8227ba01c8c69e4ba47d5a3665d0e2dfa2bcb4276009c4ecbfc202cb13 Verifying Hash Integrity ... sha256+ OK ## Loading fdt from FIT Image at 01000000 ... Using 'conf-system-top.dtb' configuration Verifying Hash Integrity ... OK Trying 'fdt-system-top.dtb' fdt subimage Description: Flattened Device Tree blob Type: Flat Device Tree Compression: uncompressed Data Start: 0x0145be34 Data Size: 20960 Bytes = 20.5 KiB Architecture: ARM Hash algo: sha256 Hash value: c4b9be846a8805e4ed05fe6754546436d2de31f97f4a2525bbd8d815319f156e Verifying Hash Integrity ... sha256+ OK Booting using the fdt blob at 0x145be34 Loading Kernel Image Loading Ramdisk to 0e18b000, end 0eae5f4b ... OK Loading Device Tree to 0e182000, end 0e18a1df ... OK Starting kernel ... Booting Linux on physical CPU 0x0 Linux version 5.10.0-xilinx-v2021.2 (oe-user@oe-host) (arm-xilinx-linux-gnueabi-gcc (GCC) 10.2.0, GNU ld (GNU Binutils) 2.35.1) #1 SMP PREEMPT Tue Oct 12 09:30:57 UTC 2021 CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache OF: fdt: Machine model: xlnx,zynq-7000 earlycon: cdns0 at MMIO 0xe0000000 (options '115200n8') printk: bootconsole [cdns0] enabled Memory policy: Data cache writealloc cma: Reserved 16 MiB at 0x0f000000 Zone ranges: Normal [mem 0x0000000000000000-0x000000000fffffff] HighMem empty Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000000000000-0x000000000fffffff] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff] percpu: Embedded 15 pages/cpu s31052 r8192 d22196 u61440 Built 1 zonelists, mobility grouping on. Total pages: 64960 Kernel command line: console=ttyPS0,115200 earlycon root=/dev/ram0 rw Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) mem auto-init: stack:off, heap alloc:off, heap free:off Memory: 221232K/262144K available (7168K kernel code, 267K rwdata, 1864K rodata, 1024K init, 160K bss, 24528K reserved, 16384K cma-reserved, 0K highmem) rcu: Preemptible hierarchical RCU implementation. rcu: RCU event tracing is enabled. rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. Trampoline variant of Tasks RCU enabled. rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 efuse mapped to (ptrval) slcr mapped to (ptrval) GIC physical location is 0xf8f01000 L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310 full line of zeros enabled for Cortex-A9 L2C-310 ID prefetch enabled, offset 1 lines L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 8 ways, 512 kB L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 random: get_random_bytes called from start_kernel+0x2c0/0x4a0 with crng_init=0 zynq_clock_init: clkc starts at (ptrval) Zynq clock init sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns Switching to timer-based delay loop, resolution 3ns Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) CPU: Testing write buffer coherency: ok CPU0: Spectre v2: using BPIALL workaround CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x100000 - 0x100060 rcu: Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 CPU1: Spectre v2: using BPIALL workaround smp: Brought up 1 node, 2 CPUs SMP: Total of 2 processors activated (1333.33 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 512 (order: 3, 32768 bytes, linear) pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations thermal_sys: Registered thermal governor 'step_wise' hw-breakpoint: Failed to enable monitor mode on CPU 0. zynq-ocm f800c000.ocmc: ZYNQ OCM pool: 256 KiB @ 0x(ptrval) e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 35, base_baud = 6249999) is a xuartps printk: console [ttyPS0] enabled printk: console [ttyPS0] enabled printk: bootconsole [cdns0] disabled printk: bootconsole [cdns0] disabled e0001000.serial: ttyPS1 at MMIO 0xe0001000 (irq = 36, base_baud = 6249999) is a xuartps vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb mc: Linux media interface: v0.10 videodev: Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti PTP clock support registered EDAC MC: Ver: 3.0.0 FPGA manager framework Advanced Linux Sound Architecture Driver Initialized. clocksource: Switched to clocksource arm_global_timer NET: Registered protocol family 2 tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes, linear) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 9580K hw perfevents: no interrupt-affinity property for /pmu@f8891000, guessing. hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available workingset: timestamp_bits=14 max_order=16 bucket_order=2 jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler mq-deadline registered io scheduler kyber registered zynq-pinctrl 700.pinctrl: zynq pinctrl initialized dma-pl330 f8003000.dmac: Loaded driver for PL330 DMAC-241330 dma-pl330 f8003000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 brd: module loaded loop: module loaded spi-nor spi0.0: s25fl256s1 (32768 Kbytes) 2 fixed-partitions partitions found on MTD device spi0.0 Creating 2 MTD partitions on "spi0.0": 0x000000000000-0x000000e00000 : "qspi-boot" 0x000000e00000-0x000001000000 : "qspi-user" libphy: Fixed MDIO Bus: probed CAN device driver interface libphy: MACB_mii_bus: probed [Firmware Warn]: /axi/ethernet@e000b000/mdio/phy@0: Whitelisted compatible string. Please remove macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 40 (80:34:28:86:2c:87) e1000e: Intel(R) PRO/1000 Network Driver e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver usbcore: registered new interface driver usb-storage ULPI transceiver vendor/product ID 0x0424/0x0007 Found SMSC USB3320 ULPI transceiver. ULPI integrity check: passed. ci_hdrc ci_hdrc.0: EHCI Host Controller ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 5.10.0-xilinx-v2021.2 ehci_hcd usb usb1: SerialNumber: ci_hdrc.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected i2c /dev entries driver cdns-i2c e0004000.i2c: 400 kHz mmio e0004000 irq 31 pcf857x 1-0020: probed rtc-isl12022 1-006f: registered as rtc0 rtc-isl12022 1-006f: setting system clock to 2018-03-19T11:06:45 UTC (1521457605) cdns-i2c e0005000.i2c: 400 kHz mmio e0005000 irq 32 cdns-wdt f8005000.watchdog: Xilinx Watchdog Timer with timeout 10s EDAC MC: ECC not enabled sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper ledtrig-cpu: registered to indicate activity on CPUs clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns timer #0 at (ptrval), irq=54 usbcore: registered new interface driver usbhid usbhid: USB HID core driver fpga_manager fpga0: Xilinx Zynq FPGA Manager registered mmc0: SDHCI controller on e0100000.mmc [e0100000.mmc] using ADMA NET: Registered protocol family 10 mmc1: SDHCI controller on e0101000.mmc [e0101000.mmc] using ADMA Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core NET: Registered protocol family 29 can: raw protocol can: broadcast manager protocol can: netlink gateway - max_hops=1 Registering SWP/SWPB emulation handler of-fpga-region fpga-full: FPGA Region probed of_cfs_init of_cfs_init: OK ALSA device list: No soundcards found. Freeing unused kernel memory: 1024K mmc0: new high speed SDXC card at address aaaa mmcblk0: mmc0:aaaa SC128 119 GiB mmcblk0: p1 p2 Run /init as init process INIT: version 2.97 booting random: fast init done jffs2: jffs2_scan_dirent_node(): Node CRC failed on node at 0x001d00f0: Read 0x5c97f158, calculated 0xbd247889 jffs2: jffs2_scan_dirent_node(): Node CRC failed on node at 0x001d10cc: Read 0x385250f9, calculated 0x99a1e049 jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001f0000: 0x19ff instead jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001f0004: 0x000c instead jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001f0008: 0xb0b1 instead jffs2: notice: (66) jffs2_get_inode_nodes: Node header CRC failed at 0x1d2ccc. {19ff,e001,00000034,755c292f} jffs2: notice: (66) jffs2_get_inode_nodes: Node header CRC failed at 0x1d295c. {196b,e001,00000034,755c292f} jffs2: notice: (66) jffs2_get_inode_nodes: Node header CRC failed at 0x1d2604. {1973,e001,00000032,503776f3} Starting udev jffs2: notice: (68) jffs2_get_inode_nodes: Node header CRC failed at 0x1d2ba4. {1954,e002,00000044,98f7fb1d} jffs2: notice: (68) jffs2_get_inode_nodes: Node header CRC failed at 0x1d2b48. {19be,e002,0000005a,2831dbb1} jffs2: notice: (68) jffs2_get_inode_nodes: Node header CRC failed at 0x1d2b04. {1916,e002,00000044,98f7fb1d} jffs2: notice: (68) jffs2_get_inode_nodes: Node header CRC failed at 0x1d2aa8. {19bd,e002,0000005a,2831dbb1} jffs2: notice: (68) jffs2_get_inode_nodes: Node header CRC failed at 0x1d271c. {1916,e002,00000044,98f7fb1d} jffs2: notice: (68) jffs2_get_inode_nodes: Node header CRC failed at 0x1d26cc. {1900,e002,0000004f,4ff67c1c} jffs2: notice: (68) jffs2_get_inode_nodes: Node header CRC failed at 0x1d2688. {190b,e002,00000044,98f7fb1d} udevd[79]: starting version 3.2.9 jffs2: notice: (68) jffs2_get_inode_nodes: Node header CRC failed at 0x1d2638. {1900,e002,0000004f,4ff67c1c} random: udevd: uninitialized urandom read (16 bytes read) jffs2: notice: (68) jffs2_get_inode_nodes: Node header CRC failed at 0x1d25c0. {193e,e002,00000044,98f7fb1d} random: udevd: uninitialized urandom read (16 bytes read) jffs2: warning: (68) jffs2_do_read_inode_internal: no data nodes found for ino #66 jffs2: Returned error for crccheck of ino #66. Expect badness... random: udevd: uninitialized urandom read (16 bytes read) udevd[80]: starting eudev-3.2.9 jffs2: notice: (68) jffs2_get_inode_nodes: Node header CRC failed at 0x1d2904. {193e,e002,00000057,da5b036c} jffs2: warning: (68) jffs2_do_read_inode_internal: no data nodes found for ino #70 jffs2: Returned error for crccheck of ino #70. Expect badness... jffs2: notice: (68) jffs2_get_inode_nodes: Node header CRC failed at 0x1d2c74. {1913,e002,00000057,da5b036c} jffs2: warning: (68) jffs2_do_read_inode_internal: no data nodes found for ino #74 jffs2: Returned error for crccheck of ino #74. Expect badness... FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. bootlogd: /dev/ttyPS0urandom_read: 4 callbacks suppressed random: dd: uninitialized urandom read (512 bytes read) Configuring packages on first boot.... (This may take several minutes. Please do not power off the machine.) Running postinst /etc/rpm-postinsts/100-sysvinit-inittab... update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing) Removing any system startup links for run-postinsts ... /etc/rcS.d/S99run-postinsts INIT: Entering runlevel: 5 Configuring network interfaces... macb e000b000.ethernet eth0: PHY [e000b000.ethernet-ffffffff:00] driver [Marvell 88E1510] (irq=POLL) macb e000b000.ethernet eth0: configuring for phy/rgmii-id link mode done. Starting haveged: haveged: command socket is listening at fd 3 haveged: haveged starting up Starting Dropbear SSH server: Waiting for kernel randomness to be initialised... haveged: haveged: ver: 1.9.13; arch: generic; vend: ; build: (gcc 10.2.0 CTV); collect: 128K haveged: haveged: cpu: (VC); data: 16K (D); inst: 16K (D); idx: 12/40; sz: 15006/57790 haveged: haveged: tot tests(BA8): A:1/1 B:1/1 continuous tests(B): last entropy estimate 8.00001 haveged: haveged: fills: 0, generated: 0 random: crng init done Generating 2048 bit rsa key, this may take a while... macb e000b000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Public key portion is: ssh-rsa AAAAB3NzaC1slkhslgslklkjlkjlljlljllj... Fingerprint: sha1!! 59:d6:19:4e:02:d8:7e:69:e0:cd:90:7b:9e:7a:95:63:12:b2:c7:2f dropbear. starting Busybox HTTP Daemon: httpd... done. Starting internet superserver: inetd. Starting syslogd/klogd: done Starting tcf-agent: OK PetaLinux 2021.2 test /dev/ttyPS0 test login: