Trenz Electronic GmbH Support Forum

Archived Boards and Threads => Archived Boards => FAQ GlobalTop GPS Receivers and Modules => Topic started by: Horsa on December 20, 2012, 11:15:19 AM

Title: How do I configure fix-rates down to 0.1 Hz?
Post by: Horsa on December 20, 2012, 11:15:19 AM
Q: How do I configure fix-rates down to 0.1 Hz?

If you want to configure the fix rate down to 0.1 Hz, you shall use the following command with parameter set to 10000 milliseconds:

Packet Type: 220 = PMTK_SET_NMEA_UPDATERATE
Set NMEA port update rate
Position fix interval (millisecond). The possible interval values range between 100 and 10000

Example:


$GPGGA,063549.000,2307.1237,N,12016.4424,E,2,17,0.70,28.4,M,17.8,M,0000,0000*50

$GPGGA,063550.000,2307.1237,N,12016.4424,E,2,17,0.70,28.4,M,17.8,M,0000,0000*58

$PMTK001,220,3*30 (this acknowledge means that PMTK220 command has been sent)

$GPGGA,063551.000,2307.1237,N,12016.4424,E,2,17,0.70,28.4,M,17.8,M,0000,0000*59

$GPGGA,063601.000,2307.1237,N,12016.4424,E,2,17,0.70,28.4,M,17.8,M,0000,0000*5F (GGA modified to be computed every 10 seconds)

$GPGGA,063611.000,2307.1237,N,12016.4424,E,2,17,0.70,28.4,M,17.8,M,0000,0000*5E

$GPGGA,063621.000,2307.1229,N,12016.4419,E,2,17,0.70,28.4,M,17.8,M,0000,0000*5C


Important difference: