Trenz Electronic GmbH Support Forum

Trenz Electronic Products => Trenz Electronic FPGA Modules => Topic started by: emerrryjones on July 30, 2021, 05:23:33 AM

Title: TEI0001-03-08-C8 (MAX1000) board
Post by: emerrryjones on July 30, 2021, 05:23:33 AM
Hi everyone,

I'm using a TEI0001-03-08-C8 (MAX1000) board with a NIOSII softcore and running applications on it.

Is it possible to do Remote System Upgrade over UART and store it on the external W74M64 flash and run it from the external W9864G6JT SDRAM with a bootloader in the internal flash?

What are the steps to do this in QSYS?

This could be a nice DEMO addition for the MAX1000 boards!

Thanks in advance!!!
Title: Re: TEI0001-03-08-C8 (MAX1000) board
Post by: Thomas D on July 30, 2021, 12:48:20 PM
Hi,
I already answered to a very similar question here: https://forum.trenz-electronic.de/index.php?topic=1288.msg6133#msg6133 (https://forum.trenz-electronic.de/index.php?topic=1288.msg6133#msg6133)
At the moment I can't help more on this topic, I'm sorry.

br
Thomas