Trenz Electronic GmbH Support Forum

Archived Boards and Threads => Archived Boards => Eddy Modules => Topic started by: krasimir.k on June 29, 2011, 05:32:34 PM

Title: Remote debug with Eddy-CPU
Post by: krasimir.k on June 29, 2011, 05:32:34 PM
Hi,
I'm trying to use remote debug under linux(ubuntu 10.04), but without success.
I following LemonIDE user guide (5.4.4) with running tae in telnet session.
The program is successful uploaded to Eddy-CPU, LemonIDE switch to Debug perspective, but following error is shown in Debug view, debugger thread:
symbol is not available 0x00000000

I tried also with gdb (esto) server again under linux, but the error is the same.
There is not problem to execute (run) remotely the program and I got trace from telnet session running tae.
Also when I tried to run /opt/lemonix/bin/arm-linux-lemonidegdb I got:
Bus error

Somebody to have the same problem before?
Title: Re: Remote debug with Eddy-CPU
Post by: Thorsten Trenz on June 30, 2011, 10:22:31 AM
Hi,
we did not experience this problem under Windows. We will try to get more information, and come back to you.

best regards
Thorsten Trenz