Print Page - 4x5 pinout spreadsheet not generating correctly for TEBA0841_REV02+TE0741

Title: 4x5 pinout spreadsheet not generating correctly for TEBA0841_REV02+TE0741_REV03
Post by: M_Brown on February 25, 2020, 07:40:00 PM

Hi,

The pinout generator is connecting JB2 on carrier with JM2 on SOM and JB3 with JM3. It should be JB2 <-> JM3, JB3 <-> JM2. I am using v2.6.3 from the website - is there an updated version that is correct, or am I just doing something incorrectly?

Thanks,
MB

Title: Re: 4x5 pinout spreadsheet not generating correctly for TEBA0841_REV02+TE0741_REV03
Post by: JH on February 26, 2020, 07:19:36 AM

Hi,
you are right, pinout planner is not correct. I will upload a separate pinout planner for TEBA0841 during the day.

br
John

Title: Re: 4x5 pinout spreadsheet not generating correctly for TEBA0841_REV02+TE0741_REV03
Post by: JH on February 26, 2020, 08:09:27 AM

Hi,
I've add as workaround a separate excel sheet file for TEBA0841 with our 4x5 modules to the download area (should be available in appr. one hour):
https://shop.trenz-electronic.de/en/Download/?path=Trenz_Electronic/Pinout
--> 4x5_series_teba0841_pinout_tracelength.xlsx

br
John

Title: Re: 4x5 pinout spreadsheet not generating correctly for TEBA0841_REV02+TE0741_REV03
Post by: M_Brown on February 26, 2020, 06:33:24 PM

Thanks!

MB

Trenz Electronic GmbH Support Forum

Trenz Electronic Products => Trenz Electronic FPGA Modules => Topic started by: M_Brown on February 25, 2020, 07:40:00 PM