Print Page - About SATA drive interface

Title: About SATA drive interface
Post by: joseer on October 17, 2019, 03:58:18 PM

Hello,

We are interested to try a SATA SSD drive on the TEBF0808 board. It's clear the data port but not sure how to connect the power connector and/or what cable to use....do you have any reference design or documentation about this?

Thanks.
Best regards.

Title: Re: About SATA drive interface
Post by: JH on October 18, 2019, 02:56:11 PM

Hello,
use PC power supply unit for the TEBF0808 over ATX connector. This can also used to supply the hard disc with is connected to the sata connector.

Reference designs(TE0808,TE0807 and TE0803) includes valid configuration for SATA, so you can use prebuilt Boot.bin and image.ub to see the HardDisk (use a know format for linux, like ext4 or FAT32)
https://wiki.trenz-electronic.de/display/PD/TE0803+StarterKit
https://wiki.trenz-electronic.de/display/PD/TE0807+StarterKit
https://wiki.trenz-electronic.de/display/PD/TE0808+StarterKit

We have some pictures how to connect everything on our Starterkit (with enclosure).
https://wiki.trenz-electronic.de/display/PD/Starter+Kit+808

br
John

Trenz Electronic GmbH Support Forum

Trenz Electronic Products => Trenz Electronic FPGA Modules => Topic started by: joseer on October 17, 2019, 03:58:18 PM