I'm using the TE0715-04-30-1C, with a TE0703-06 carrier.
I've copied the supplied pre-built image files (/prebuilt/os/petalinux/1GB/image.ub and /prebuilt/boot_images/04_30_1c_1gb/u-boot/BOOT.bin) to the SD card.
It seems to boot fine into Linux, but the Ethernet interface is not working.
I've tried with an ethernet cable connected to the network, and also a direct cable connection to a laptop.
Boot transcript is attached.
Given that this is the supplied pre-built image, what am I doing wrong?
Many thanks!
Hi,
did you use the 2018.3 reference design?
Can you send me the serial number of your TE0715 to support@trenz-electronic.de
--> You can find the number on the white sticker with QR Code
br
John
Hello,
Yes, this is using the 2018.3 design: TE0715-test_board-vivado_2018.3-build_05_20190509094447.zip
The md5sum of BOOT.BIN is 292eb875c2531f2dfb407820b014fece
The md5sum of image.ub is ceb9e526dd3febd518f1d2293d5d2f26
Serial number has been emailed.
Many thanks!