Hi,
I would like to find the dimensions of four on the mounting holes on the TE0701-02 board.
This is to allow dimensioning of an FMC plug-in board.
The holes I'm concerned with are the two either side on the FMC connector, and the two either side of the ENPIRION logo (not the corner holes).
I need to know their relationship to each-other, and to the FMC connector.
I don't have the TE0701-02 board in my possession at the moment, so can't measure the actual board.
Can anyone help me with this, please, either by giving me the dimensions, a document, or a CAD file that I can open in a viewer?
Thanks,
Rob
Hi,
we just added dimensions to the assembly diagram:
http://www.trenz-electronic.de/fileadmin/docs/Trenz_Electronic/TE0701/documents/AD-TE0701-03.PDF
best regards
Thorsten Trenz
Great, thank you!
Hi,
one issue we've had with the diagram:
there is no horizontal measurement on J10.
For the moment we are placing J10 based on a visual inspection of the diagram, but a dimension would be very helpful, please.
Thanks,
Rob
Hi,
we updated the assembly diagram:
http://www.trenz-electronic.de/de/download/d0/Trenz_Electronic/d1/TE0701/d2/documents.html
best regards
Thorsten Trenz
Great, thank you!