Trenz Electronic GmbH Support Forum

Trenz Electronic Products => Trenz Electronic FPGA Modules => Topic started by: th-oc on April 09, 2021, 11:24:34 AM

Title: TE0745 CAN bus 1Mbaud
Post by: th-oc on April 09, 2021, 11:24:34 AM
Hi,

We are trying to use the CAN bus at 1Mbaud for our application. We have tested it at 500k and are able to communicate with other devices and can see the correct waveform on the scope. However when we set the baudrate to 1Mbaud (from buildroot linux) ip link set up can0 type can bitrate 1000000 then attempt to send data cansend can0 123#1234 we receive a strange pattern on the scope only. Have you any ideas what may be the cause?

Title: Re: TE0745 CAN bus 1Mbaud
Post by: Antti Lukats on April 12, 2021, 08:21:36 AM
no, we can not help, have no suggestions.

br
Antti Lukats