Trenz Electronic GmbH Support Forum

Trenz Electronic Products => Trenz Electronic FPGA Modules => Topic started by: Gloria on April 06, 2021, 01:38:20 PM

Title: test camera using TE0726-03M
Post by: Gloria on April 06, 2021, 01:38:20 PM
Hi, I want to initialize the imx219 using the sensor_config.h and rpicam.c in demo1. I replace the iic_write/read_reg with the function of xillinx. However, the project does not work. I want to know that what the IIC address of the camera? The TE0726.PDF  notes that the board use a IIC MUX and the address of the MUX is 0x70,how should I get the address of the IIC of csi?
Title: Re: test camera using TE0726-03M
Post by: Oleksandr Kiyenko on April 07, 2021, 09:12:41 AM
Hi Gloria,

please not create several topics with the same questions.
I answer this question at https://forum.trenz-electronic.de/index.php/topic,939.new.html#new

Best regards
Oleksandr Kiyenko