Print Page - Need FPGA board supporting 3.3V & 1.2V LVCMOS I/Os.

Title: Need FPGA board supporting 3.3V & 1.2V LVCMOS I/Os.
Post by: Paul_H on October 29, 2020, 12:33:22 AM

I need an FPGA board that supports 3.3V LVCMOS I/O and 1.2V LVCMOS I/Os. The Xilinx 7-series (Spartan7, Artix7, etc.) FPGAs can support that, but are there any boards available that support changing the FPGA I/O banks Vcco? If not directly supported, reasonable hardware mods would be fine too.

Thanks!

Title: Re: Need FPGA board supporting 3.3V & 1.2V LVCMOS I/Os.
Post by: JH on October 29, 2020, 07:29:50 AM

Hi,
many of our modules has variable bank voltages, where you can change bank voltages on carrier like you need
https://shop.trenz-electronic.de/en/Products/Trenz-Electronic/
for our 4x5 modules we have some overview where you can see which banks are variable:
https://wiki.trenz-electronic.de/display/PD/4+x+5+SoM+Integration+Guide#id-4x5SoMIntegrationGuide-ModulePowerConnectionTable

I need some more details spec to send you a more specific proposal

br
John

Trenz Electronic GmbH Support Forum

Trenz Electronic Products => Trenz Electronic FPGA Modules => Topic started by: Paul_H on October 29, 2020, 12:33:22 AM